Tuesday, February 24, 2009

Ice Dams The Simple facts


What is an Ice Dam?
An Ice Dam is exactly what the name implies, a barrier made of ice that prevents water from flowing off a roof. Ice Dams occur when water from melting snow on a roof flows to the edge of the roof and freezes. Subsequent melting produces more water than becomes trapped on the roof because the Ice Dam prevents it from flowing off into the gutter or to the ground.

Shingles are designed to shed water that runs down a roof, rather than protect against water pooling on the roof's surface. As a result, standing water behind the Ice Dam backs up under the shingles and penetrates the roof boards. The end result is significant damage can occur with your ceiling, insulation and roof boards from an Ice Dam.

What should you do prevent an Ice Dam?
The most effective way to prevent Ice Dams from developing is to keep the "under surface" of your roof cold. Ice Dams most often occur when the base layer of snow against the roof melts and runs down beneath the top layer of snow above. Keeping your roof (attic) cold prevents the deepest layer of snow from melting.

Two factors contribute to keeping your roof cold, proper ventilation and adequate insulation. Makes sure your attic is well ventilated and that the vents are clear of snow, and debris. If you have had previous experiences with Ice Dams than improving you attic ventilation should move to the top of your spring projects list. Whether you do it yourself or hire it done it's a fairly inexpensive project that pays back big dividends.

Next inspect your insulation for bare or matted spots, and provide insulation as needed. Remember not to climb in your attic without proper respiratory protection and knowing where to step. If you are unsure you should have a professional go up and make the assessment. Adding additional insulation in your home not only reduces the risk of Ice Dams but lowers both your heating and air conditioning cost.

Another way to prevent Ice Dam formation is to remove snow from your roof. They actually make a device called a "roof rake" that is telescopic and designed for the specific purpose of snow removal. Use the roof rake to keep the lower 4 to 6 feet of your roof free of snow. This will allowing any melting snow above to have an obstruction free path to the gutters or the ground.

If damage has already occurred, a contractor can minimize future damage by doing the following:

Locate the water entry points within your home and seal them with roofing adhesive, and clear a path for the water to flow unrestricted. If he cannot stop the leak provide protection for your insulation and create a temporary drain system to direct water away from the point of the leak.

Lower the temperature in the section of the roof where the leaks has occurred. You can accomplish this, again, with additional ventilation, or in a pinch a fan strategically placed in your attic.

Finally when the situation is under control be sure that your insulation is peeled back and dried thoroughly. Any insulation that has mold should be removed and disposed of in a proper container. Depending upon your skill level, provided it is safe, you can either do this work yourself or hire a professional.

One final thought
If the roof on your home is older be sure that you let your roofing contractor know you have had Ica Dam issues when it is time to replace your roof shingles. Even though MBC code calls for the use of "ice and water shield" on the edges of the roof, your contractor may have additional recommendations regarding improving the attic ventilation.





No comments: